FAQ For Xhorse VVDI Key Tool Remote Key Programmer

VVDI KEY Tool Remote Unlock Wiring Diagram-all here

Xhorse VVDI KEY Tool application guide on the remote unlocking. Shows which points to use with the cradle and free hand.


Attach 40 pictures shown as below.








































uobdiishop.com and Xhorse Company welcome all feedback on VVDI KEY TOOL, we do and will work hard to fix bug and improve device.

About the renew remote function, if renew show failed. Please take a clearly PCB photo of both sides and send to Sales@UOBDIISHOP.com

about other problem feedback, please describe the problem in detail, and we will try our best to solve the problem.

if device not work well/with bugs please post email at Sales@UOBDIISHOP.com.

Best regards.  

QiHang Technology Co,Ltd

Email: sales@uobdiishop.com <7days 24hours>
Skype: uobdiishop
WeChat: + 86-15171416490
Whatsapp: +86-15171416490
Phone call: +86-15171416490

Diagnose KIA Sportage Engine Airbag via X300 DP Pad

Are you interested in OBDSTAR X300 DP Pad and how it work on KIA Sportage?

Below is OBDSTAR X300 DP review for checking. X300 DP diagnose KIA engine, airbag and read mileage OK!

OBDSTAR X300 DP diagnose KIA Sportage SL 2012 engine, airbag
After power on OBDSTAR X300 DP and connect it with car, go to “DIAG-ASIA” then select “KIA”.

Select car model: “Sportage (SL)”,

car year “2012” and “F 2.0 DOHC” in this case.

OBDSTAR X300 DP tablet can diagnose KIA Engine, AT, ESP, Airbag, Aircon, EPS, TPMS, SPAS systems, etc.

First, choose “Engine” module to diagnose.

X300 DP read KIA engine ECU information:

X300 DP display KIA engine live data:

X300 DP read KIA DTC fault codes. (No DTC code in this case, system normal)

Next, choose “Airbag” module to diagnose, select “Mode 1”.

X300 DP view KIA airbag ECU live data including:
Front crash info
Driver side crash info
Passenger side crash info
Rollover crash info
Crash Data info
Service data

Then, go to “MILEAGE ADJUSTMENT”, select “KIA” to check car mileage.

Select Sportage 24C16.

Select kilometer or mile.
X300 DP PAD read 2012 KIA Sportage 24C16 mileage as 96352 KM.

The car dashboard mileage show 96331 KM.
It’s a little bit different but OK!

QiHang Technology Co,Ltd

Email: sales@uobdiishop.com <7days 24hours>
Skype: uobdiishop
WeChat: + 86-15171416490
Whatsapp: +86-15171416490
Phone call: +86-15171416490

MB sdconnect DAS Xentry Errors Failures and Solutions

Most concerned FAQ (press ctrl+f to search):  

Q: How to reset DAS language?
A: Right click the DAS icon on desktop to open DAS Properties and click Shortcut. The letter “en” after letter “l” means English language, so if you want to reset other language i.e. French then change as”fr”.

Click “OK” to save setting.
Q: How to reset Xentry language?
A: Click the blue Gear-like icon at the left corner of Xentry, then “Setting language” then the language you want, then click “OK” to agree restart Xentry.
Q: Got error after reset Xentry language.
A: Exit Xentry then reset your computer system language, for example, your Xentry version is 09/2019 then reset the time as any day of September, i.e 09/05/2016.


Q: Got error ” No valid DAS license; DAS will now be closed” after DAS activation.
A: 1. Go to C:// programme files/Mercedes-Benz/StartKeyCenter2 and open “StartKeyCenter.exe” (see below picture), if DAS activation is valid, then go to C:// then open DAS  folder to replace bin file (programme files/Mercedes-Benz/DAS) 2. If it displays activation is invalid, send DS Lan-ID to customer service to active.


Q: Run Xentry and got “2221-45” error.

A: Click C:// programme files/Mercedes-Benz/Xentry/fusoko/eclipse/plugins, delete “com.daimler.xentry.diagservice-…”.
Q: EWA-NET can’t star, how to solve?

A: Click computer “Start” then “EWA – NET Admin Tool” to enter.

  1. Click “Start EWA server” “”Start EPC server” “Start WIS server” (If they were started, click “Stop” then “Restart”.
  2. Reboot the computer then open EWA-NET to login.

Q: mb sdconnect firmware program lost, WIFI pass fails to reset and 204 error.

A: 1. Reason: the sdconnect Mux firmware program is deleted, the result is WIFI and SDC4 number can’t be reset.

Solution: update firmware, mb sdconnect c4 update guide:

  1. one-by-one update 01_Booimage_2_3.zip, then 02_CSD_2_10.zip, 03_PmPic29_Cpld13.zip.

Key: 1) Install new battery 2) Plug OBD cable into the car for power (or use OBD 12V battery adapter for replacement, otherwise you may get 622 error)

Q: after enter sdconnect Administration, got 749 error.


A: Go to “Local area connection” to reset IP address:


Q: sdconnect 30 and 31 error, have poor communication with cars.

A: Possible reasons:

  1. The cable and vehicle has poor communication.
  2. The wired and wireless IP is not reset as required.
  3. Run Star C3 software on sdconnect toolkit.
  4. If the above 3 pieces have no problem, maybe the MUX or the cable has problem. Contact email at your supplier.

    QiHang Technology Co,Ltd

    Email: sales@uobdiishop.com <7days 24hours>
    Skype: uobdiishop
    WeChat: + 86-15171416490
    Whatsapp: +86-15171416490
    Phone call: +86-15171416490

Instructions for the SDconnect Software Update

The kernel update of the SDconnect is similar to a regular software update via the Star Diagnosis system.

Step 1 Introduction

Step 2 Connecting the SDconnect to the Star Diagnosis system

Step 3 SDnetControl

Step 4 Software update

Step 5 Completing the installation

Step 6 Checking the installed software

QiHang Technology Co,Ltd

Email: sales@uobdiishop.com <7days 24hours>
Skype: uobdiishop
WeChat: + 86-15171416490
Whatsapp: +86-15171416490
Phone call: +86-15171416490

Change Ferrari 458 mileage OK by Digiprog 3 V4.94?

Q: Can I change Ferrari 458 mileage by a Digiprog 3 clone? Anyone has tested it OK?
A: Yes, someone can verify it!

Q:Ferrari with a clone tool?
A:Why not? the mileage in Ferrari cluster is a very easy system!

Tested Digiprog 3 clone change Ferrari 458 and Ferrari California mileage OK!
Used this version: Digiprog 3 V4.94

Once did a 458 with Digiprog 3.

Someone doubt that DP3 can do this. But for me, it works! Though it is a clone, but the software is same as original tool.

The tools only needs to read the EEPROM, we know Digiprog can do this for many other cars without problem, so if it reads the correct mileage so I don’t see much risk.

But the mileage is also in the ECU of Ferrari.

I’ve done a 2010 458 by OBD with Digiprog 3. 2min. Done. Perfect
If it reads the correct old mileage you’re good to go
it was no problem when using Digiprog 4.94. all good.
I recommend to bought the tool instead of removing dash . better

Yes, Ferrari 458 Italia 2010 – OBD OK (1min)
I done a Ferrari California with Digiprog 3 in 2min OBD

Where to get Digiprog 3 V4.94 in both good quality and price?
Cheap V4.94 Digiprog III Odometer Master Programmer Entire Kit

QiHang Technology Co,Ltd

Email: sales@uobdiishop.com <7days 24hours>
Skype: uobdiishop
WeChat: + 86-15171416490
Whatsapp: +86-15171416490
Phone call: +86-15171416490

FAQ of MB SD C4 V2017.05

Q: Why I need reactivate for Xentry, How to solve the problem?

Step1:After register successful;

Step 2:pls copy the file “lic_key_2.dat” from C:\Documents and Settings\All Users\Application Data\LicDir\lic_key_2.dat”, and then paste it to F:\xentry\bin

Step3: Right Single-click Xentry QQ图片20170524182257,  and change the file from “start_xentry.exe” into “Xentry.cmd”

Q: There pop up the fault(1-2)-2 503.9901 when I test on vehicle, how to fix the trouble?
A: Pls enter the control panel<Network status and tasks<View network status and tasks<Change the adapter settings<local network connection<Attributes,
Then choose as follow option, and enter the IP address as below.QQ图片20170524182810

QiHang Technology Co,Ltd

Email: sales@uobdiishop.com <7days 24hours>
Skype: uobdiishop
WeChat: + 86-15171416490
Whatsapp: +86-15171416490
Phone call: +86-15171416490

How to copy 4D via Handy baby key copy machine?

The Handy baby Key copy need work with the specialize 4D chip, pls confirm you prepare the correct chip for work.
According following steps to done copy.

1.Turn on the Clone machine and enter into menu screen, use arrow button to select your language.

  1. Put the key into signal coil area and use arrow button to select “COPY”, then wait, it is copying.
  2. After read the date of key, press “OK”
  3. Begin decoding. (If you find the decoding process failure, please operate again.)
  4. Decoding succeed, it will show the key security password.
  5. Put 4D clone able chip into signal coil, press “OK”button.
  6. After cope finished, it has done. If you want to copy more, just replace new chip and press “ok”.
  7. If you want to reuse the copied chip, please press“Left arrow”to the menu screen, select “RECOVERY” to initialize the chip, then it will be ok to cope again.

Pls go to Handy Baby Car Key Copy for 4D/46/48 Chips to learn more.

QiHang Technology Co,Ltd

Email: sales@uobdiishop.com <7days 24hours>
Skype: uobdiishop
WeChat: + 86-15171416490
Whatsapp: +86-15171416490
Phone call: +86-15171416490

Lastest KESS V5.017Added 140 Protocol No Token Limited Support Online


KESS V5.017 Firmware Support Online Added 140 Protocol No Token Limited

Top 11 Reasons To Get V5.017 KESS V2:
1. It’s Master Version. SW Version: V2.22. Hardware Version: V5.017.
2.  It supports More 140 Protocols Than the HW v4.036 KESS.
3. You can use it Online and  it will not damage the hardware.
4. SW support multi-languages: English, German, Spanish, Italian, Portuguese, French
5. Update Method: by Link to download
6. No Token Limitation: can be used unlimitedly, no need to worry about tokens any more.
5. Powerful function, support much more ecu list than old version.
7. No Checksum Error
8. Working System: Windows XP Professional /Win7 / Windows 8
9. With coverage of all major brands and protocols including Line, CAN, EDC17 and MED17 and for Ford J1850. KESS V2 is everything you need to work as a successful tuner at a very affordable price.
10. Read and write ECU via OBD2 port directly, no need disassemble ECU from the car, easy to use
11. Software with usb dongle, more confidential.

Install/User Note:
1 No Tokens limited,100% Working!!!
2 No need disconnect with internet when you use.
3 Based on V4.036,V5.017 KESS V2 has 140+ protocol.Compare with KESS V2.32 V4.036 ,new V5.017 supports more car list.Support EDC17 ECU.
4 Supports both cars and trucks!!!(Not for all trucks,please notice)You can download our mode list.

Our top PCB pictures:

About Update:
1 About software update:Free Send by Link always.
2 About firmware update:Need change Chips,need pay in future.

About Tokens:
No tokens at all,as our kess support online function.No token calculation.

About USB Dongle:
KESS 5.017 comes with USB dongle,this is key for Kess 5.017 software.When you install KESS software,it maybe get error in windows “cannot find the driver” please take usb dongle off and connect it again.This is caused by Windows system.No problem with our tool.NO need connect USB dongle all the time,only when you install the software you need connect,after installation,you can take if off,the kess can work alone.

Kess V2 5.017 Features:
1. Check of the battery voltage in real-time
2. Full Recovery function in case of problems
3. Automatic correction of the Checksum, (where available)
4. Boot-Loader mode supported
5. Management of the programming counters
6. ScanTool function to remove DTC
7. Several options of reading/writing speed
8. Option to write full file/section of the map
9. Full integration with ECM Titanium,which means it can work with ECM Titanium perfectly

What’s diffierence between the KESS 5.017 and Kess 4.036?

  Connect Online Tokens Computer RE. Support list EDC17 ECU
KESS 4.036 NO Need Re-charge XP or few WIN7 Cars, few others NO
KESS 5.017 Yes No Need


XP/WIN7/WIN8/Windows virtual machine Almost Cars, trucks, boats… Yes


We have tested it on both cars and trucks,100% works!

QiHang Technology Co,Ltd

Email: sales@uobdiishop.com <7days 24hours>
Skype: uobdiishop
WeChat: + 86-15171416490
Whatsapp: +86-15171416490
Phone call: +86-15171416490


Condor XC-Mini Bluetooth: Worked!

Condor XC MINI key cutting machine now is verified to work with InstaCode LIVE by Bluetooth, which supports the latest version of database, can be online updated from InstaCode LIVE server. Also, one year FREE authorization for InstaCode LIVE.

Why do you need InstaCode LIVE for Condor XC-MINI?

1. Have all the knowledge you need  at your fingertips

No-one else offers greater access to the information that lies at the very core of your business. It’s independently run, so there’s no bias toward any manufacturer, and it includes details and guides on every aspect of what you do.

InstaCode Live features:

  • Cross-referencing for 132+ key blank manufacturers
  • 8000+ key code series
  • 3 billion + key codes
  • Support for the widest range of key cutting machines
  • Searches for bittings across a range of code series
  • Images of key blanks and keyways
  • Instructional guides for transponders
  • Guides for opening vehicles and disabling airbags

2. You’lll always be first through the door

InstaCode Live is designed to keep pace with the rapidly evolving and increasingly sophisticated technology used in our industry.

By providing data through an online software programme, you can have 24-hour access to the most up-to-date information available.

With new codes and data being researched, verified and added every day, you can be sure InstaCode Live will always be the most comprehensive, up-to-date pool of knowledge available.

So, while your competitors are scrambling to find the latest updates, you can be confident you’ll always have the tools to help your customers, with whatever future service they need.

3. In a mobile world, access is key

By moving to an online service, we’ve also made InstaCode Live even more convenient. You can access the information 24 hours a day, wherever you’ve got an Internet connection. You have the flexibility to operate the program on either a desktop computer or laptop, a tablet or even your smartphone.

Your toughest decision will be deciding which single device you choose to permanently run the program on or make it easy and purchase a registration for each of your devices.

4. Unlimited access to the doors you want to open

InstaCode Live’s tailored annual subscription fee has been carefully priced to be affordable for all types of general and automotive locksmith businesses. You can choose a package according to what you need, so you’re not subscribing to features that aren’t relevant to you. And you’ll be able to use that information as often as

you want, because your subscription gives you unlimited access without the worry of extra fees.

You’ll never have to invest in another upgrade either, because we’ll constantly update and improve the software.

5. Access has never been so easy

InstaCode Live is designed for an increasingly complex world, but we’ve made sure it’s still simple for you to use it. You can subscribe directly from the InstaCode website, and have access to the entire library within minutes.

You’ll be guided through each step with easy instructions and online tutorials, and quick links to the InstaCode mobile apps. The user-friendly interface will then help you find the information you need quickly and efficiently.

6. Transponder, Remotes & Diagnostic

InstaCode contains a huge amount of useful information about the immobilizer systems of vehicles. Collected by actual locksmiths, InstaCode’s Transponder information has several different types of information;
General system overviews – this can include anything from a generalized description of how the system works (great for fault finding) to the location of the immobiliser ECU.
Transponder Parts – this is a list of known parts from various aftermarket manufacturers (and OEM) that can be used with a vehicle.

Diagnostic Information – this is information that is useful when connecting to the vehicle with a diagnostic device; Information such as the OBDII connector location or which dongle to use with you MVP; and on-board Procedures – this can include the steps to program addition keys, erase keys or even reset the immobiliser system after it has been “locked”.

7. Find Bitting and Wafer Swapper

The Find Bitting feature is the locksmith’s silver bullet! Often referred to as the “Fill” feature, InstaCode will search through an entire code series for the matching codes when given any number of the known cuts! This is a “must have” for any locksmith who makes keys to vehicles. The feature enables the creation of keys to operate all the locks on a vehicle without the need to disassemble every lock!
An advanced feature of this allows for the searching of “one up also” depths; searching for two possible depths in a position. This is perfect for use with lock readers/decoders.

Even when multiple keys can operate the known cut, the Find Bitting feature will generate a “Cutting Tree”. The “Cutting Tree” is a list of the possibly correct keys, sorted into an order that minimizes the number of key blanks that need to be used to cut and treat every possible key combination.
Who has ever needed to rekey a lock? Almost every locksmith! But how many rekey the lock to a new code that is valid? With the Wafer Swapper feature, a new code can be calculated for you that will use all the parts that are already in use; with no need for additional parts from pinning kits or wafer kits. And you can be certain that the original key will not work!

8. Car Openings

InstaCode’s vehicle opening information is vast. Written by actual locksmiths, it provides useful tips and ideas that are applicable to the vehicle in front of you. Whether it is a simple as pulling the inside handle,

spiking the green wire or simply so difficult that you need specialist tools, InstaCode will point you in the correct direction. It’s like having access to decades worth of locksmith experience on your phone!

InstaCode LIVE System Requirements


  • Operating system: Android 4.0 or higher
  • Processor: ARMv7-based CPU, 1Ghz or higher recommended
  • Internet: WiFi/3G/4G data connection required


  • Operating system: iOS 8 or higher
  • Internet: WiFi/3G/4G data connection required


The minimum computer hardware requirements are:

  • Pentium CPU
  • 1GB of free (available) RAM
  • 350MB of available Hard Disk Drive space
  • Mouse or other pointing device
  • One of: Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows Server 2003, Windows Server 2008 or Windows Server 2012.
  • The minimum display resolution required is 1024 x 576 (Higher display is required for complete display of some Dimple and Bit series) with 16 bit colour (sometimes called 64K colors or 65536 colours) or greater.
  • Internet Explorer 7 or later.

A Windows supported printer is optional.

If you run several applications simultaneously you will require more RAM.

InstaCode LIVE on PC, Android/ iOS Phone

Both General and Auto Code have: PC Android iOS
Search Options
Code number  √  √  √
Manufacture  √  √  √
Model and year  √  √  √
Key blank  √  √  √
Card  √  √  √
Lock type  √  √
Key type  √  √  √
ISN (InstaCode Serial Number)  √  √  √
Search on any combination of criteria  √  √  √
Other Features
Number of different key blank manufacturers 52 52 52
View key blank pictures & profiles  √  √  √
Define preferred Key blanks manufacturer  √
Graphical layout which displays the key blank  √  √
Intuitive user interface  √  √  √
Live updates from the Internet  √  √  √
Add your own code series  √
Make your own depth/space cards  √
Master Keying Module included  √
Build a grand master keying system and download it to your machine  √
Password protection available  √
Sort key blanks into desired order for display  √
Shows picture of cut key  √  √  √
Stores key hook for each key blank  √
Stores client information  √  √  √
Stores user notes against each series  √  √ 2017
Supports laser and plunge cut keys  √  √  √
Your choice of display units (inches or mm)  √  √  √
Select manufacturer  √  √  √
Print Ilco Universal II  √
Print a whole series  √
Print the current code and it’s data  √
Print Transponder  √
Configurable printer and printer paper tray  √
Key Machines (Direct communication)
Keyline – Bianchi 883 Transponder key reader/writer  √
Keyline – Bianchi 993 Power Lynx  √
Keyline – Bianchi Versa  √
Keyline – Bianchi 994-Laser  √
Barnes BD Laser  √
Silca UnoCode – Original  √
Silca Quattrocode with speed control  √
Silca Triax  √
Silca Futura  √  √  √
Ilco UltraCode  √
ITL – 9000  √
CodeMax  √
JMA ProCode  √
ECM 200  √
Information for manual key machines
Ilco Universal II  √  √
HPC 1200 Blitz  √  √  √
HPC Punch  √  √  √
Curtis  √  √  √
Framon  √  √  √
A1  √  √  √
Add-on Options PC Android iOS
Find bitting  √  √  √
— Find partial bitting in associated series  √  √  √
— Progression chart to eliminate wastage (cutting tree)  √  √  √
— Queue of keys to be cut (both machines and printouts)  √
— Lock wafer positions  √  √
— Wafer swapper  √  √  √
Vehicle opening instructions  √  √  √
— Complete ASP catalogue featuring colour picture  √
Transponder programming instructions  √  √  √
— Complete ASP catalogue featuring colour picture  √
— Remote programming instructions  √  √
— Airbag safety instructions  √  √

Credits to http://www.instacodelive.com/

QiHang Technology Co,Ltd

Email: sales@uobdiishop.com <7days 24hours>
Skype: uobdiishop
WeChat: + 86-15171416490
Whatsapp: +86-15171416490
Phone call: +86-15171416490

%d bloggers like this: