CGDI BMW FEM BDC key learn in the dismantling method

CGDI BMW FEM BDC key learn is in the dismantling method instead of OBD method. Then you have to know the FEM/BDC system location, 95128 IC location, 95256 IC location and Key learning position, read the detail in the below parts.

  1. BMW FEM/ BDC installation location.

1

  1. 95128 IC location

2

  1. 95256 IC location

3

  1. Key learning position

4

That’s all.

 

uobdiishop-1_%e5%89%af%e6%9c%ac
QiHang Technology Co,Ltd

Site:www.uobdiishop.com
Email: sales@uobdiishop.com <7days 24hours>
Skype: uobdiishop
WeChat: + 86-15171416490
Whatsapp: +86-15171416490
Phone call: 0086-15171416490

Advertisements

Xhorse VVDI Prog FAQ

Let’s start with a question: On the pic.1 is a W164 EIS I removed from a car manufactured date in 2005. It is slightly different from the diagram in Xhorse VVDI Prog. I am aware that some W164 have a NEC chip, but isn’t the NEC in cars after 2009?

I thought all W164 EIS before 2009 can be read with a programmer? or am I wrong?
QQ图片20170918202337

Answer: yes…you are wrong with Xhorse VVDI Prog you can read 2005 or highest 2006 year….almost all from 2006 have NEC and sure all from 2007 have NEC only yet.

Have one VVDI Prog and I did the Tricore 1766 on the ECU SIM2K-341 today and it was quite successful, I corrected 4 resistors of 470 ohms.
QQ图片20170918204801
QQ图片20170918200652

Q: VVDI Prog can read and writes tricore tc-1797 ?
A: No. And those Tricores it can read is only some VW ecu’s because VVDI Prog don’t have security bypass for other… For example: Audi A3 ECU with tricore TC-1762 it cannot read!

uobdiishop-1_%e5%89%af%e6%9c%ac
WuHan QiHang Technology Co,Ltd
Site:www.uobdiishop.com
Email: sales@uobdiishop.com <7days 24hours>
Skype: uobdiishop
WeChat: + 86-15171416490
Whatsapp: +86-15171416490
Phone call: 0086-15171416490

How to update original Autel Maxidiag Elite MD802

Here is a step-by-step update instruction of original Autel MaxiDiag Elite MD802 4 system/full system diagnostic scan tool.

Autel MaxiDiag Elite MD802 4 system
Autel MaxiDiag Elite MD802 full system

This function allows you to update the scan tool software through a computer.

How to register Autel Elite MD802 scanner?
User would update the scan tool ONLY after you had registered the tool on our website: http://www.maxidas.com. Then you could download software, update online, retrieve information and get warranty service.

NOTE: Prior to registration, please confirm your network is working properly.

1. Log in Autel official website http://www.maxidas.com.
2. Click on the Update tool bar at the top of the screen, and then select User Register. Or click on the 3. Updates column in the lower right corner of the screen, and select Register.
4. The Register Information interface appears. Please read through the instructions, and click on Agree to continue.
5. Enter the Product SN (Serial Number) and Register Password, and click on Next.
Autel-maxidiag-Elite-md802-update-1
6. Follow the windows prompts to finish the registration.

NOTE: You can click “About” to check MD802 scanner information.

How to update Autel MD802 Diagnostic scan tool?
Autel frequently releases software updates that you can download. The Update feature makes it very easy to determine and get exactly what you need.

1. Install Autel PC Suit through the included CD, or download the applications in our website:  http://www.auteltech.com

2. Make sure that your computer is connected to the Internet.

3. Load the SD card of the scan tool to your PC.

4. Run the Autel MaxiDiag update option in Check-Elite PC Suit software. Wait for the Log In window to pop up.
Autel-maxidiag-Elite-md802-update-2
5. Enter the user name and password and wait for the Update window to display.  If you forget your password unintentionally, you may always click the [Forget your password?] to link to our website and find your password back.

In the Autel Elite MD802 Update window, select the items you want to install. Usually, you should install all available updates.

Generally, there are two ways to update Autel MaxiDiag Elite MD802 programs:

Batch updating:
Select the programs that you would update by clicking on the check boxes next to those items.  Then click the Update Selected Items button on the right side of screen.

Or, click on the SELECT ALL checkbox on the right side of screen and all updatable items will be selected automatically.

Then click the Update Selected Items button on the right side of screen.

Check the updating process by observing the upper left progress bar [downloading] and upper right progress bar [installing]. You may also find progress information in the Status column of updated items.

Anytime you could click the Pause button on the right side of screen to suspend all progresses, and the state of those suspended items would change to STOPPED.

To resume updating process, you may need to select those 63 suspended items again, then click the Update Selected Items button. The progress will resume from the break point.

When the downloading is completed, the downloaded programs will be installed automatically. The new version of Autel MD802 will replace the old version.

Single updating
Find the desired updating item and click the INSTALL button in the same line. With updating in progress, the INSTALL button changes to STOP.

Check the updating process by observing the upper left progress bar [downloading] and upper right progress bar [installing]. You may also find progress information in the Status column of updated items.

Anytime you could click the Pause button in the line to suspend this progress, and the state of this item would change to STOPPED.

To resume updating process, click the INSTALL button in the line again. The progress will resume from the break point.

When the downloading is completed, the downloaded program will be installed automatically. The new version of Elite MD802 will replace the old version.

NOTE:
Autel Maxidaig scanner support one year free update online, but after one year, you need to order Autel MD802 one year software online update service (130 USD).

Software Management
To view the list of installed programs or to delete an installed program, please follow these steps:
Click on the Installed Programs tag entry and the page will show the list of programs installed.  Select the program(s) that you would delete.
Batch delete: Select the programs that you would delete by clicking on the check boxes to the left of those items. Then click the DELETE button on the right side of screen.
Single delete: Click the UNINSTALL button in the line of your would-be-deleted program.

A window asking “Are you sure to delete the software?” will pop up for your confirmation.
Autel-maxidiag-Elite-md802-update-4
Click on Yes to delete the program(s) selected, or on No to cancel the action.
The deleted program will automatically add to the end of program list in the UPDATE page in case you would like to install again.

Theoretically, all programs in latest versions will be automatically compatible with the older versions, but if your scan tool do have a compatible problem and want to retrieve the older version for some programs, you may need to delete them first then install the older version again. Choose older version from the pull-down menu of program version.
Autel-maxidiag-Elite-md802-update-5

uobdiishop-1_%e5%89%af%e6%9c%ac
WuHan QiHang Technology Co,Ltd

Site:www.uobdiishop.com
Email: sales@uobdiishop.com <7days 24hours>
Skype: uobdiishop
WeChat: + 86-15171416490
Whatsapp: +86-15171416490
Phone call: 0086-15171416490

Newest Tachosoft Mileage Calculator V23.1

The world of the most mileage counter calculation software,can not only calculate mileage, but also can provide mileage data in the position of the computer program, convenient for user to change yourself. The latest version of the program provides more than 2500 kinds of car mileage calculation, support the latest new models,including BMW, GM, Ford, Modern, Volkswagen, audi, kia, fiat, Honda, nissan, Toyota, Lincoln, logo, Citroen, Mazda, mitsubishi, chery, Volvo, OPEL, porsche, Renault, subaru cars, etc.

The specific type as below:
Acura
Acura 3.5 LTR – 2x 93c46 – 1997 year
Acura 3.5 LTR – 2x 93c56
Acura MDX – 93c56 – 2002 year
Acura MDX – 93c66 – 2006 year
Acura MDX – 93c76 – 2007 year
Acura RDX – 93c66 – 2007 year
Acura RL – 93c66
Acura RSX – 93c56
Acura RSX Type S – 93c46 – 2002 year
Acura TL – 93c46
Acura TL – 93c56
Acura TSX – 93c46
Acura TSX – 93c66 – 2006 year
Admiral
Admiral – 24c01
Alfa Romeo
Alfa Romeo 145/146 – ST6249 C6/N4 – 1995-1996 years
Alfa Romeo 145/146 – 68HC(7)05B16 – 1998 year
Alfa Romeo 147 – ST6249
Alfa Romeo 147 – NEC – 2001 year
Alfa Romeo 147 – 93c86 – 2001-2002 years
Alfa Romeo 147 – 93c86 – from 2002 year
Alfa Romeo 156 Type 1 – 68HC711KG4 – until 2001 year
Alfa Romeo 156 Type 2 – 68HC711KG4 – from 2002 year
Alfa Romeo 159 – 93c86 – 2006 year
Alfa Romeo 164 – 68HC05B6 – 1994-1995 years
Alfa Romeo 164/166 – 68HC11
Alfa Romeo 166 – 93c56
Alfa Romeo 166 – 93c56 – 2000 year
Alfa Romeo 166 – 68HC11KG4 – 1999 year
Alfa Romeo Brera – 93c86 – 2007 year
Alfa Romeo GTV – 68HC05B6 – 1995 year
Alfa Romeo Spider – 93c86 – 2001 year
Alfa Romeo Spider – 93c86 – 2006 year
Audi
Audi A2 VDO – 93c86 – 2001 year
Audi A3 UK NSI – 93c56
Audi A3 / A4 Jaeger – 68HC912
Audi A3 Type 1 – 93c66 – 1997-1999 years
Audi A3 Type 2 – 93c66 – 1997-1999 years
Audi A3 – 68HC912 – 1999 year
Audi A3 – 68HC912 – 2003 year
Audi A3 – 93c86 – 2003 year
Audi A4 Bosch – 24c08 – 2001 year
Audi A4 VDO (without MFA) – 93c46 – 1994-1997 years
Audi A4 VDO (with MFA) – 93c56 – 1994-1997 years
Audi A4 UK NSI – 93c56 – 1995-1997 years
Audi A4 UK NSI – 93c56 – 1997-1998 years
Audi A4 UK NSI new – 93c56
Audi A4 Type 1 – 93c66 – 1997-1999 years
Audi A4 Type 2 – 93c66 – 1997-1999 years
Audi A4 – 93lc86 – mod. 2000 year
Audi A4 – 93c86 – mod. 2000 year
Audi A4 – 68HC912
Audi A4 – 68HC912DG128A
Audi A6 VDO – 93c46 – 1994-1997 years
Audi A6 UK NSI – 93c56 – 1995 year
Audi A6 UK NSI – 93c56 – 1997-1998 years
Audi A6 Type 1 – 93c66 – 1997-1999 years
Audi A6 Type 2 – 93c66 – 1997-1999 years
Audi A6 VDO – 93c86 – 1999-2001 years
Audi A6 – 68HC912DG128 – 2000-2001 years
Audi A6 – 68HC912DG128A
Audi A6 Type 2 – 68HC912DG128A
Audi A6 – 24c32 – 2007 year
Audi A8 VDO – 93c56 – until 10.1996
Audi A8 VDO – 93c66 – 1998 year
Audi A8 VDO – 93c86 – 2001 year
Audi A8 VDO – 93c86 – 2003 year
Audi A8 – 24c17 – 1999 year
Audi A8 – 24c17 – 2001 year
Audi TT – 68HC912 – 1998-2000 years
Audi TT- 68HC912DG128A
Audi 100 TDI – 93c46 – 1995 year
BMW
BMW CAS MODULES
BMW CAS2 (old) – 9s12DG256
BMW CAS2 (new) – 9s12DG256
BMW CAS3 – 9s12DG256
BMW EWS MODULES
BMW EWS3 SW ?? – 68HC11EA9 – 1997-2006 years
BMW EWS3 SW 08 – 68HC11EA9 – 1997-2003 years
BMW EWS – MC9S12DG64
BMW EWS 4.3 – MC9S12D64
BMW LCM MODULES
BMW LCM – 68HC11PH8 – 2003 year
BMW LCM – 9S12D64 – 2006 year
BMW LCM2 – 68HC711P2
BMW LCM3 – 68HC912D60
BMW 316-320 VDO – 93lc56 – 1991-1995 year
BMW 318 – 93c56
BMW 320 Coupe – 93c56 – 1994 year
BMW 325 TDS – 93c56
BMW 525i – 93c46
BMW 3xx Compact innen – 93c46 – 1995 year
BMW 3xx Compact aussen – 93c46 – 1995 year
BMW 3xx E36 – 93c46 – 1998 year
BMW 3xx – M35080 – 2001-2002 years
BMW 3xx – M35080 – from 2002 year
BMW 5xx, 7xx BROWN – 93c46
BMW 5xx, 7xx BLUE – 93c56
BMW 5xx GREEN – 24c02
BMW 5xx – M35080 – 2001-2002 years
BMW 5xx – M35080 – from 2002 year
BMW E36 – 93c56 – until SW 20
BMW E36 – 93c56 – from SW 21
BMW E36 – 93c46 – SW 24 innen
BMW E36 – 93c46 – SW 24 aussen
BMW E39 Low – 93c56 – until SW 10
BMW E39 Low – 93c56 – SW 11
BMW E39 Low – 93c56 – SW 12
BMW E39 Low – 93c56 – SW 15
BMW E39 Low – 93c66 – SW 16
BMW E38/E39 IKE SW 12 – 93c56
BMW E38/E39 IKE SW 13 – 93c56
BMW E38/E39 IKE SW 14 – 93c56
BMW E38/E39 IKE SW 15 – 93c56
BMW E38/E39 High – 93c56 – SW 05 / SW 07
BMW E38/E39 High – 93c56 – SW 11
BMW E38/E39 High – 93c56 – until SW 12
BMW E38/E39 High – 93c56 – SW 13
BMW E38/E39 High – 93c56 – SW 14
BMW E38/E39 High – 93c56 – SW 15
BMW E38/E39 High – 93c66 – SW 12, SW 13
BMW E39 Dash – 35080
BMW E46 Motometer – 93c66
BMW E46 – (Dash+LCM+EWS) – 2002 year
BMW E46 – (Dash+LCM+EWS) – 2003 year
BMW E46 – (Dash+LCM+EWS) – 2004 year
BMW E53 X5 – (Dash+CAS2)
BMW E60 5xx – (Dash+CAS) – 2005 year
BMW E63 6xx – (Dash+CAS) – 2005 year
BMW E65 7xx – (Dash+CAS) – 2003 year
BMW Z3 innen – 93c46
BMW Z3 innen – 93c56 – SW 9, 10
BMW Z3 aussen – 93c46
Buick
Buick Allure – 9s12H128
Buick Regal – 95020 – 1998 year
Buick Riviera – TC97101P – 1996 year
Cadillac
Cadillac All – 68HC11E9 – 1992-1996 years
Cadillac CTS – 93c66 – 2003-2006 years
Cadillac Deville – 93c56 – 2001-2003 year
Cadillac Deville – 93c66 – 2003-2004 years
Cadillac Deville Type 1 – 93c46 – from 2000 year
Cadillac Deville Type 2 – 93c46 – from 2000 year
Cadillac DTS – 93c46 – 2005-2006 years
Cadillac DTS – 93c56 – 2002 year
Cadillac DTS Type 1 – 93c46 – 2000-2003 years
Cadillac DTS Type 2 – 93c46 – 2000-2003 years
Cadillac Eldorado – 68HC11E9 – 1994-1998 years
Cadillac Escalade – 25020 – 2005 year
Cadillac Escalade – 93c46 – 2007 year
Cadillac Escalade – 95020 – 2000-2002 years
Cadillac Escalade – 95020 – 2003 year
Cadillac Escalade (hours) – 25020 – 2005 year
Cadillac Seville – 68HC11F1 – from 1997 year
Cadillac Seville Type 1 – 93c46 – from 2000 year
Cadillac Seville Type 2 – 93c46 – from 2000 year
Cadillac SRX – 93c66 – 2005 year
Cadillac STS – 93c46 – 2005 year
Chery
Chery A15 Amulet – 93c66 – 2005-2006 years
Chery A15 Cowin – 93c66
Chery A15 Flagcloud – 93c66
Chery A21 Fora – 93c66
Chery ECU BOSCH 797 – 95080
Chery ECU BOSCH 797 (hours) – 95080
Chery MS25 – 93c66 – 2005 year
Chery S14 – 93c66 – 2002 year

Chery T11 Tiggo – 93c66

Newest Tachosoft Mileage Calculator V23.1<<<< only 13.99USD
http://www.uobdiishop.com/newest-tachosoft-mileage-calculator-v231_p0686.html

uobdiishop-1_%e5%89%af%e6%9c%ac
QiHang Technology Co,Ltd
Site:www.uobdiishop.com
Email: sales@uobdiishop.com <7days 24hours>
Skype: uobdiishop
WeChat: + 86-15171416490
Whatsapp: +86-15171416490
Phone call: 0086-15171416490

Digiprog III VS Tacho Pro 2008 VS Digimaster III

Don’t you think there are too many kinds of mileage programmers in the market, and even several versions for one same name one. To help you choose the workable mileage programmers in the Chinese market, and Improve your courage try clone tools on any kind of vehicles, uobdii.com engineer summarizes the pros and cons among Tacho Pro 2008Digiprog 3 and Digimaster 3 as follows. I am sure you will find it is very useful.

Frequently asked questions and answers:
Q: Up to which year they work with?
U2008 change mileage in the dashboard for the old car prior to 2006 year.

Digiprog3 works with the newer cars up to 2012 year, so if you think Tacho universal for 100usd does all what DP3 does and think it waste money, then it is a wrong point.

Digimaster 3 also works with newest vehicles.


Q:What vehicles they can work?
U2008, DP3 and D3 all work with a lot of vehicle models.

Difference: DP3 can work with cars, a little part of trucks and motorcycles, such as: ford,
Fiat, vw, Audi, seat, skoda, Merc 203 and 204, bmw CAS, Peugeot, Honda Accord.

Digimaster 3 can program mileage for BMW and Mercedes Benz.

Digiprog III Vehicle List:
latest-v4.94-digiprog3-vehicle-list 

Digimaster III Vehicle List:
Digimaster iii Vehicle List 

Tacho Pro 2008 Vehicle List:
Tacho Pro 2008


Q:Can copy digiprog 3 work with BMW and Mercedes Benz?
No, Digimaster 3 is the best mileage programmer for BMW and Mercedes Benz.

Q: Which one is most powerful?
Digimaster 3 is best quality and most expensive, but it can correct odometer, decode audio, reset airbag (SRS), program ECU and program key (for Mercedes and BMW).

Digiprog3 and tacho universal are mainly used to correct mileage


By what way they correct mileage
There are three method options to correct mileage: via diagnosis, via chip and via Micro. By which way, all the three tools main unit will prompt the user depends on specific models, at the same time it will display car model appearance, where to remove chip or Micro, what adapter to use and where the chip or Micro locates.

Take digiprog for example, when it corrects mileage for Toyota YARIS C 56, it clearly shows the car model appearance, where to remove chip in the dashboard, what adapter to use and where the dashboard chip locates.

How to update?
Digimaster 3:
digimaster3 support upgrade online.

Plug the power supply and network cable into digimaster3, click “Management”-“Update”-“Software Upgrade”, then wait it untill the screen display “Upgrade update OK”.

Digiprog 3: it can update, once the newest software is released, if you want to update, send the supplier serial number and they will send you an updating software. Steps: Connect the USB to the computer, start dp3,run Digiloader1.exe; Choose the right port, select Digi1.bin,click the button, then dp3 enter blue screen, if dp3 dose not enter blue screen, check the setting and restart from step 1; wait it process end, if the power supply disconnect, the unit will be damages.

Tacho Pro 2008 can’t update, after power on, don’t select “Update” and donot connect with the computer, otherwise, the screen will display “Reset”.


uobdiishop-1_%e5%89%af%e6%9c%ac
QiHang Technology Co,Ltd
Site:www.uobdiishop.com
Email: sales@uobdiishop.com <7days 24hours>
Skype: uobdiishop
WeChat: + 86-15171416490
Whatsapp: +86-15171416490
Phone call: 0086-15171416490

VVDI2 BMW V4.3.0 FEM BDC key program & KM reset tested 100% works

VVDI2 latest software version V4.3.0 update: BMW V4.3.0 adds BMW FEM/BDC key learn, erase key, FEM/BDC KM reset etc. Below parts incl. VVDI2 BMW FEM /BDC authorization, update content, free download link and using tips.

VVDI2 BMW V4.3.0 FEM/BDC system function is optional, the supplier could help you in the authorization of VVDI2 FEM / BDC, you could email us sales@uobdiishop.com for a best price and after-sale service.

  1. Authorization of VVDI2 BMW FEM / BDC key program & KM reset function (have no Ikeycutter Condor) 
  2. Authorization of VVDI2 BMW FEM / BDC key program & KM reset function (have Ikeycutter Condor)


VVDI2 BMW V4.3.0 Update:

*** Require firmware V4.3.0

VVDI2 BMW V4.3.0 Capabilities:

1.support make new key with ignition switch(support adding spare key and all key lost, all key lost require ISN)

2.support reset FEM/BDC KM(cluster require reset manually)

3.support erase key(after erasing the key position become blank position)

4.support backup coding

5.support restore coding
1

2

VVDI2 V4.3.0 download free:
https://mega.nz/#!W1pSRRTL!0n8OX4wshaB1s0O06SDhTR0KvO32nPHZWg4CQjBMdrA

The user who have VVDI2 interface with BMW software could update SW and FW self directly, only connect your VVDI unit internet and press update FW and SW…

VVDI2 BMW V4.3.0 make FEM BDC keys in 3 steps: get key info->programming FEM/BDC system->make keys

Tips:
1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first
3.in FEM/BDC interface, if ‘get key info’ the type not support, it will show: customer should use “BMW E-sys software” program FEM/BDC system. then programming FEM/BDC system with VVDI2-BMW
4.when operation on ‘programming FEM/BDC system ‘interface, please don’t close this software window until all procedures completed.
5.programming FEM/BDC system, require soldering and get eeprom.(FEM 95128 chip, BDC 95256 chip)usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.
6.programming FEM/BDC system, must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car, but with problem (such as the remote control cannot start the car
or the car with window problem)please use “BMW E-sys software” coding for FEM/BDC system.

uobdiishop-1_%e5%89%af%e6%9c%ac
QiHang Technology Co,Ltd
Site:www.uobdiishop.com
Email: sales@uobdiishop.com <7days 24hours>
Skype: uobdiishop
WeChat: + 86-15171416490
Whatsapp: +86-15171416490
Phone call: 0086-15171416490

How to activate the YanHua digimaster iii equipment?

Original YANHUA Digimaster iii is the best odometer correction tool at present, support almost all vehicles from US/AU/EU/Asin

Digimaster iii Related Technical Document Free Download:
digimaster-3-car-list
tokens-recharge-manual-for-digimaster-3-english
digimaster-iii-configuration-list
digimasteriii-update-instruction
digimaster3-english-user-manual

Digimaster iii Activation
Digimaster-III need to be activated on line with the Activation code provided by us in the first using. You can activate and
recharge Digimaster-III by the following steps.

1

Step 1: Power on and connect the D3 with internet. The unactivated£DD3 show as below. Click “OK” to start activation.
2

Step 2: Input the validation code in the left dialog, Click “next” to download update programme and management programme.
3

Step 3: Activation window will appear after downloading Management programme. Please input your information
4

Step4 Enter the activation code and password provided by sales then click “next”.
5

Pls contact our customer to provide activation ID and Password intime.

uobdiishop-1_%e5%89%af%e6%9c%ac
QiHang Technology Co,Ltd
Site:www.uobdiishop.com
Email: sales@uobdiishop.com <7days 24hours>
Skype: uobdiishop
WeChat: + 86-15827208659
Whatsapp: +86-15827208659
Phone call: 0086-15827208659

VVDI2 BMW V4.3.0 FEM BDC key program & KM reset tested 100% works

VVDI2 latest software version V4.3.0 update: BMW V4.3.0 adds BMW FEM/BDC key learn, erase key, FEM/BDC KM reset etc. Below parts incl. update content, free download link and using tips.

VVDI2 BMW V4.3.0 FEM/BDC system function is optional, the supplier could help you in the authorization of VVDI2 FEM / BDC (sales@uobdiishop.com)

VVDI2 V4.3.0 Update details:

************************************************ ********************

*** 2017-08-16

*** Require firmware V4.3.0

************************************************ ********************

===== VAG V4.3.0 =====

  1. Bugfix

===== BMW V4.3.0 =====

  1. Add BMW FEM/BDC system key learning, erase key
  2. Add BMW FEM/BDC system reset KM
  3. Add FEM/BDC syste backup coding, restore coding
  4. Attention: FEM/BDC Key Learn is an option function, it require buy license or exchange with bonus points. Contact your dealer for help!

===== Porsche V4.3.0 =====

  1. Bugfix

===== PSA V4.3.0 =====

  1. Bugfix

===== Transponder Programmer V4.3.0 =====

  1. Bugfix

===== J2534 V4.3.0 =====

  1. Bugfix

===== Online Upate Tool V4.3.0 =====

  1. Bugfix

===== Quick Start V4.3.0 =====

  1. Bugfix

 

21

VVDI2 V4.3.0 Free download Resource

The user who have VVDI2 interface with BMW software could update SW and FW self directly, only connect your VVDI unit internet and press update FW and SW…

VVDI2 BMW V4.3.0 make FEM BDC keys in 3 steps: get key info->programming FEM/BDC system->make keys

VVDI2 BMW V4.3.0 can perform these functions:

1.support make new key with ignition switch(support adding spare key and all key lost, all key lost require ISN)

2.support reset FEM/BDC KM(cluster require reset manually)

3.support erase key(after erasing the key position become blank position)

4.support backup coding

5.support restore coding

Tips:
1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first
3.in FEM/BDC interface, if ‘get key info’ the type not support, it will show: customer should use “BMW E-sys software” program FEM/BDC system. then programming FEM/BDC system with VVDI2-BMW
4.when operation on ‘programming FEM/BDC system ‘interface, please don’t close this software window until all procedures completed.
5.programming FEM/BDC system, require soldering and get eeprom.(FEM 95128 chip, BDC 95256 chip)usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.
6.programming FEM/BDC system, must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car, but with problem (such as the remote control cannot start the car
or the car with window problem)please use “BMW E-sys software” coding for FEM/BDC system.

uobdiishop-1_%e5%89%af%e6%9c%ac
WuHan QiHang Technology Co,Ltd
Site:www.uobdiishop.com
Email: sales@uobdiishop.com <7days 24hours>
Skype: uobdiishop
WeChat: + 86-15827208659
Whatsapp: +86-15827208659
Phone call: 0086-15827208659

How to free get the BMW FEM/BDC function for your VVDI2 equipment?

VVDI2 Release the BMW FEM/BDC function already, in order to feedback all user, each user enable to use the points  free get BMW FEM/BDC function authorization, but you must will have follow question as below:
1. How can I check the points which I have?
2. How to collect the points?
3. How many points should I need for free get BMW FEM/BDC Function?
4.How can I do if I haven’t enough points?

1. How can I check the points which I have?
Enter the VVDI2 Commander Key programmer software system, click the “points system”, then you can get your own points data.
(Note: Require VVDI2 software version up to V4.25, and firmware version up to V4.26)
TIM图片20170817201715

2. How to collect the points?
1. Generate the Remote Key to collect Points
2. Combine the VVDI Key Tool wtih VVDI, all points will be accumulated and calculated.
TIM图片20170817201653

3. How many points should I need for free get BMW FEM/BDC Function?
1. If you have the VVDI2 Commander, you need spend 8000 points to free get BMW FEM/BDC function.

2. If you have the VVDI2 Commander and Ikeycutter Condor, you only need 6000 points to free get BMW FEM/BDC function.

4. How can I do if I haven’t enough points for free get BMW FEM/BDC Function?

1. If you have VVDI2 Without Ikeycutter Condor, you have to pay 750USD for BMW FEM & BDC Functions Authorization Service

2. If you have VVDI with Ikeycutter Condor, you have to pay 580USD for BMW FEM/BDC Function Authorization Service

uobdiishop-1_%e5%89%af%e6%9c%ac
WuHan QiHang Technology Co,Ltd
Site:www.uobdiishop.com
Email: sales@uobdiishop.com <7days 24hours>
Skype: uobdiishop
WeChat: + 86-15827208659
Whatsapp: +86-15827208659
Phone call: 0086-15827208659